Electrical - Busbars, Connectors & Insulators

Terminal Block Part BTerminal Block Part B is the core of the Snap Terminal Strip system, combining secure screw terminals with a nickel-plated copper construction...

5/16" Power Post - BlackThis power post features a 5/16” stud for secure, high-current cable connections. It’s ideal for smaller power runs or ground returns...

Dual Deutsch DTP 4 Position Busbar - 5/16" StudsWith 4 positions for Deutsch DTP connectors, this sealed busbar delivers high-current capacity with protected terminations. It’s...

3/8" Power Post - RedA rugged single power post with a 3/8” stud, built for high-current cable termination. It’s perfect for distributing power from batteries,...

Busbar 150A 6P & Cover 6X 1/4" TerminalsBusbars are used for high current distribution and at the same time they provide connections for batteries and/or...

Busbar 150A 4P & Cover 4X 1/4" TerminalsBusbars are used for high current distribution and at the same time they provide connections for batteries and/or...

DTP BusbarDesigned for Deutsch DTP connectors, this busbar allows clean distribution to high-power circuits. It’s perfect for sealed, vibration-resistant wiring in marine and off-road systems....

12 Position Male Sealed Deutsch Connector Busbar - 5/16" StudThis waterproof busbar is designed for Deutsch-style DT connectors and built to resist moisture, corrosion, and...

Busbar 85 Series LinkFeatures: Compatible with 85 Series surface- and panel-mount circuit breaker products Tin-plated copper busbars deliver superior electrical performance with minimal voltage drop...

150A Dual Stud Common Busbar - 20 Screw with CoverFeatures: Compact Footprint allows for installation in areas where space is limited Variety of High and...

85 Series Triple Link BusbarCompatible with 85 series surface and panel mount circuit breaker products. Tin-plated copper busbars deliver superior electrical performance with minimal voltage...

Dual 12 Position Male Sealed Deutsch Connector Busbar - 5/16" StudThis sealed dual-input busbar features 12 positions for Deutsch DT connectors, offering secure, waterproof connections...

VPNB2 MANL 2 Position All-In-One Distribution Block with CoverT-Spec designed VPNB2 distribution block to handle the high-current power and ground distribution for two (2) power...

PowerBar 1000 - 8 5/16" Terminal Studs w/CoverComplex wiring systems require a single point to consolidate large and small conductors. The PowerBar 1000 offers a...

2610 Terminal Block 65AMP - 10 CircuitFeatures: Closed back design completely insulates power from the mounting surface Each screw pair is 1 isolated circuit Jumpers...

4014 CableCap - Red 1.25 to 0.70Features:Insulate stud type connectors on alternators, starters, windlasses and other high amperage devicesWARNING: This product can expose you to...

Maxibus CoverPart# 2719Cover for 2127 & 2128WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California...

Dual PowerPost Connectors Designed for connecting high amp conductors Includes one black and one red insulator WARNING: This product can expose you to chemicals including...

2105 MaxiBus 250AMP Common BusBars 12 x #10 Terminal ScrewsBusbars are used to consolidate multiple wires or feed multiple circuits.Features: Insert molded stainless steel studs...

2002 PowerPost High Amperage Cable Connector 5/16" Stud Insulated single stainless steel stud terminates multiple large conductors.Features: Connects high amperage cables securely Stud dimensions: 5/16" x...

Square CableCap Insulators Pair Red/BlackSquare CableCap insulators - Cable size 1/0Pair: 1 Red/1 BlackWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which...

2107 PowerBar 600AMP Cable Connector - 8 x 3/8" 16 Stud TerminalSpecifications: Maximum Voltage: 300 V AC/48V DC Number of Terminal Studs: 8 Terminal Type:...

2722 DualBus Plus 1/4" Stud, 5 x 10-32 Screw TerminalFeatures: Combines negative and positive buses on one block Clear polycarbonate cover snaps on to meet...

4008 CableCap - Red 0.47 to 0.13 StudFeatures:Insulate stud type connectors on alternators, starters, windlasses and other high amperage devicesWARNING: This product can expose you...

4 x 5⁄16- 18 Stud TerminalPart# 2127 SpecificationsContinuous Amperage 250 Amperes AC/DCVoltage Rating 300 Volts AC Maximum / 48 Volts DC MaximumBus Material Tin-Plated Copper...

2604 Terminal Block 65AMP - 4 CircuitFeatures: Closed back design completely insulates power from the mounting surface Each screw pair is 1 isolated circuit Jumpers...

2151Features: New isolated stud design uses standard 5/16" hardware and permits stacking of terminals Compact, high-amp fuse-Appropriate for DC Main, inverter, windlass, and bow thruster...

2512 Terminal Block 30AMP - 12 CircuitFeatures: Closed back design completely insulates power from the mounting surface Each screw pair is 1 isolated circuit Jumpers...

Terminal Block 65AMP - 6 CircuitFeatures: Closed back design completely insulates power from the mounting surface Each screw pair is 1 isolated circuit Jumpers allow...

2710 Cover for DualBus 2702Specifications: Length: 6-3/8" Height: 7/8" Width: 2-3/8" Weight: 0.04lb WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which...

PowerPost High Amperage Cable Connector #10 StudFeatures:  Insulated single stainless steel stud terminates multiple large conductors Connects high amperage cables securely Stud dimensions: #10-32 x...

2608 Terminal Block 65AMP - 8 CircuitFeatures: Closed back design completely insulates power from the mounting surface Each screw pair is 1 isolated circuit Jumpers...

Pro Installer Link Joinder 4-WayThis tin-plated bus bar can be used to link 4 adjacent DC products together.  The rating varies from 450-650 Amps, depending...

Bus Bar HD 3 Stud 650A MC5Pro Installer buss bars are designed for flexibility and scalability. The snap-out side skirts allow for additional cable entry,...

Pro Installer Link Joiner 5-WayThis tin-plated bus bar can be used to link 5 adjacent DC products together.  The rating varies from 400-650 Amps, depending...

MaxiBus - 6 5/16" Studs - 250 AMPThe Egis Mobile Electric 6250-600 is a 250A-rated MaxiBus power distribution block featuring six 5/16" (M8) studs, designed...

Terminal Feed Through ConnectorsEliminates chage and provides strain relief when passing high current through hulls, decks and bulkheads.Features: Perfect for passing high current cables through...

2708 BusBar Cover for PowerBar 2104Specifications:Dimensions: 8.500" x 3.375" x 2.750"WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to...

2304 MiniBus 100 Ampere Common BusBar 5 x 8-32 Screw TerminalFeatures:Great for limited space applications in electronics cabinets and under dashboardsWARNING: This product can expose...

Multi Purpose Bus Bar, 12 Way/2 x 100A (with covers)BEP bus bars include tin-plated, brass-insulated mounting bases and flame-resistant flexible plastic covers. The covers are...

BB-5 Bus BarIdeal as a DC ground tie point or positive bus, this heavy-duty, 500-amp-rated bus bar assembly features 5/16 in. studs on 1 in....

10mm Double Instulated StudThe Pro Installer insulated studs are a smart choice for marine installers. An increased stainless steel stud length allows up to three...

4 Position Battery Terminal - POS/NEGThe V-BATT-TML is a four-position battery terminal that can accept up to (2) 1/0 AWG and (2) 4 AWG, down...

BB-2 Bus BarIdeal as a DC ground tie point or positive bus, this heavy-duty, 500-amp-rated bus bar assembly features 5/16 in. studs on 1 in....

XD Relay Cross-Over Bus BarThe XD Relay Cross-Over Bus Bar allows users to link together Egis XD Single, Dual, and Triple XD Relays to each...

5503 Cover included Accepts 5/16" (M8) ring terminals For use on systems up to 32 Volts DC Swing out design allows replacement of the fuse...

2104 PowerBar 600AMP Cable Connector 4 x 3/8 16 Stud TerminalSpecifications: Max Voltage: 300 V AC/48 V DC Number of Terminal Studs: 4 Terminal Type:...

2404 Terminal Black 20AMP - 4 CircuitFeatures: Closed back design completely insulates power from the mounting surface Each screw pair is 1 isolated circuit Jumpers...

2 Position Bus/Base - Only 10mmThis heavy-duty dual stud busbar features two 3/8” studs for high-current connections. It supports large cable lugs and is ideal for linking batteries, power...

2 x 5⁄16"- 18 Stud Terminal6 x#10-24 Terminal Screws Part# 2128 SpecificationsContinuous Amperage 250 Amperes AC/DCVoltage Rating 300 Volts AC Maximum / 48 Volts DC...