Anchoring & Docking - Windlass Accessories

QNC CHC Flush Mount Chain CounterQNC CHC is a complete and reliable tool to remotely operate the windlass and check the length of the lowered...

Foot SwitchStamped 304 Stainless Steel/Rubber Cover.This Foot Switch is normally off and momentarily on when depressed by foot. Ideal for use with windlasses. Constructed of...

Stainless Steel Anchor Swivel for Chain Size 1/4"-5/16"316 stainless steel swivel anchor connectors are designed to easily slide over anchor rollers, preventing snagging, minimizing wear...

MAXWELL AA710WIRELESS, HAND HELD REMOTE WINDLASS CONTROLLER AND RODE COUNTERAll the features of the AA560 plus options to control a bow thruster or deck lights...

Seal Kit f/2200 & 3500 Series Windlass GearboxesKit includes: (2) 55 x 70 x 8 oil seal (2) 20 x 2 O-ring (1) Sight glass...

Reversing Solenoid Pack - 12VMaxwell Reversing Solenoid Pack 12V, replaces P19045.

Replacement Stripper for RC6/RC8 WindlassWindlass Replacement Stripper Arm Assembly KitApplications: Maxwell RC6 and RC8 Windlass

Pressure Arm Upgrade KitMade specifically for Maxwell's Freedom Series of Windlasses.

FOOTSWITCHMaxwell heavy-duty, weather resistant units have a UV stabilized water proof diaphragm and are supplied complete with mounting instructions and screws. Rated at 200 amps...

WCS830 Windlass Control SwitchWindlass control board (UP/DOWN). Electric device enabling windlass even in the rudder area. IP67 front seal.

T6415-12 Reversing Solenoid 12V Unit for Windlass MotorsThe Quick T6415 is a reversing contactor that is able to operate electric motors for windlasses and capstans....

Quick Pocket TransmitterFeatures: Number of keys: 2 Power supply: CR2450 3V litio alkaline-battery Microcontroller-operated functions FSK modulation and carrier frequency 913Mhz Operating temperatures from -15°C...

900/DW Anchor Lowering Foot Switch - WhiteAnchor lowering switch with safety cover to prevent accidental push-button operation.

HRC1002 2 Button Remote ControlMultipurpose watertight hand-held remote control 2 Button. HRC is the new Quick range of multipurpose hand-held remote controls, designed for remote...

900 Anchor Up Foot SwitchSafety cover prevents accidental operation.

EMERGENCY CRANK HANDLE (RC8, RC10, RC12 SERIES)For use with RC8, RC10, RC12 & Freedom Series anchor winches. Constructed of light weight, durable injection-moulded plastic, these...

P10068 Motor - 12VPermanent magnet replacement windlass motorUsed in the Freedom 500, VC500, VW500 and the VWC500 windlassesThis product may not be returned to the...

HRC1002L 2 Button Remote Control with LEDMultipurpose watertight handheld remote control with integrated LED lamp.The main innovation of the multipurpose HRC hand-held remote control is...

Non-Reversing Solenoid Unit - 12VQuick T6315 is a non-reversing contactor that is able to operate electric motors for windlasses and capstans. Due to the external...

900 Anchor Down Foot Switch - BlackSafety cover prevents accidental operation.

REMOTE UP/DOWN CONTROLEasy to use panel-mounted Up/Down switch for remote windlass operation from the helm, flying bridge or cockpit. Available for use with dual-directional solenoids....

Replacement Pressure Arm f/HRCFF WindlassFeatures: Applications: HRCFF Sold Individually

Motor Cima - 1200W - 24V - 4-Hole Flange 24V 1200W DC 3500RPM IP66 Diameter: 114 x 181mm This product may not be returned to...

AA Sensor Cable for AA150 & AA560 15M (49.2')The Maxwell AA Sensor Cable is compatible with AA150 & AA560 Rode Counters.Features:The male plugs on both...

Label 3500Maxwell 3856 Round Label 3500

PM Solenoid Pack - 12VMaxwell's PM Solenoid Pack that is 12V.This product may not be returned to the original point of purchase. Please contact the...

G3 Anchor Winch Wireless Remote - Auto DeployThe TRAC Outdoors G3 Anchor Winch Wireless Remote allows you to wirelessly raise and lower your anchor. It...

Rode CounterAuto Anchor 150 - panel mount rode counter for electric or hydraulic windlasses using all-chain or rope/chain rode. Rode length monitoring from the helm....

Maxwell AA560Panel Mount Windlass Controller and Rode Counter Preset stopping point on retrieval One-touch function to deploy and retrieve a preset length of rode Adjustable...

Spring-Pressure Arm for RC6, 8 & 10Maxwell Spring-Pressure Arm specifically for RC6, RC8 and RC10.

Stripper Arm Kit For Freedom 500Trouble free transition from rope to chain by means of an innovative pressure arm system within a safer enclosed design....

Stainless Steel Chain Stopper - 5/16" - 3/8"Chain Stoppers help prevent damage to the windlass and reduce the risk of accidental free fall of the...

Freedom Shaft Service KitMaxwell shaft service kit for Maxwell Freedom series windlasses.

Replacement Stripper Arm for RC10 & HRC10Maxwell replacement stripper arm specifically for RC10 and HRC10.

HRC1004 4 Button Remote ControlHRC Quick Handheld is a multipurpose remote with 4 buttons. This remote is constructed with rubber inserts to ensure high strength,...

HRC1004L 4-Button Remote with LED LightThe main innovation of the multipurpose HRC hand-held remote control is the built-in LED lamp, which facilitates operation in the...

Motor Cima - 1200W - 12V - 4-Hole Flange 12V 1200W DC 3500RPM IP66 Diameter: 114 x 181mm This product may not be returned to...

Stripper Arm Kit For Freedom 800Trouble free transition from rope to chain by means of an innovative pressure arm system within a safer enclosed design....

FOOTSWITCHMaxwell heavy-duty, weather resistant units have a UV stabilized water proof diaphragm and are supplied complete with mounting instructions and screws. Rated at 200 amps...

FOOTSWITCHESMaxwell heavy-duty, weather resistant units have a UV stabilized waterproof diaphragm and are supplied complete with mounting instructions and screws. Rated at 200 amps and...

"It Floats™" - Locking Winch Handle - Injection Molded Fiberglass Nylon"It Floats™" Locking Winch Handle features a patented design. Made by air assist injection molding...

Wireless Remote for G3 Anchor Winch Allows push-button anchor winch operation from any location.  The wireless remote clips into a handy storage bracket that can be...

Stainless Steel Chain Gripper PlateThis Chain Gripper Plate stabilizes anchor chains and reduces stress on windlass when anchored in heavy seas. The two holes are...

Wireless Remote for G2 Anchor WinchAllows push-button anchor winch operation from any location.  The wireless remote clips into a handy storage bracket that can be...

Windlass Clutch Retaining Clip - HalfSpare clutch half retaining clip for Maxwell 3500 VW, VWC and VWCLP windlasses

Wired Second Switch for G3 Anchor WinchAdd a convenient second anchor winch switch. Includes everything you need to install an auxiliary switch in the location...